by Vladimir Egorovich Lelyukhin, Olga Valerievna Kolesnikova, Kristina Nikolaevna Permyakova
ABSTRACT: Introduction : The main problems hindering the creation of fully automatic systems of design of parts and technologies of their production are considered. The search for and formalization of...
by Aziz ur Rehman, Fahd Nawaz Khan, Huzaifa Asif, Tauheed Shehbaz, Balaji Aresh
ABSTRACT: Tungsten inert gas (TIG) welding was performed on a 1.6 mm thick Ti5Al2.5Sn alloy sheet to analyze the influence of welding current on the resultant microstructure and mechanical properties in the...
by Shi Feng, John P.T. Mo
ABSTRACT: In Industry 4.0, multiple research subjects have been involved in processing enormous information generated during the manufacturing process. Meanwhile, they all pursue the same goal, that is, to...
by Muhammad Umair Naseer, Muhammad Waqas Afridi, Hamza Moshin, Tauheed Shehbaz, Fahd Nawaz Khan
ABSTRACT: A flexible manufacturing system (FMS) is an integral part of a smart factory of Industry 4.0 in which every machine is interconnected and works autonomously. Robots are in the process of replacing...
by Salman Khan, Atteeq Uz Zaman, Massab Junaid, Tauheed Shehbaz, Muhammad Awais Khan, Fahd Nawaz Khan, Muhammad Ramzan Abdul Karim
ABSTRACT: Mass and heating rates alter the thermal properties, molecular structure, and phase changes of the materials. This study aimed to investigate the influence of sample mass (10-30 mg) and heating...
by Amirhossein Mehdipoor, Ivanka Iordanova, Mohamed Al-Hussein
ABSTRACT: The construction industry lags behind other sectors in terms of productivity performance, with many megaprojects experiencing cost overruns. While there are various reasons for this, the most...
by Waseem Shehzad, Wajahat Khalid, Danyal Hakeem Jokhio, Ahmed Raza Qureshi, Amna Ali Dojki, Muhammad Ramzan Abdul Karim
ABSTRACT: Hybrid metal-organic frameworks (MOFs) have many positive features like high porosity, surface area, and conductivity as compared to other materials. They have better potential than pristine ones...
by Romaine Byfield, Ghani Semroud, Matthew Laurent, Ibrahim Tansel
ABSTRACT: Additive manufacturing (AM) was originally developed to manufacture polymer prototypes. Today, it has been used for the manufacturing of many critical machine components. Most of the structural...
by Salvador Castillo-Rivera
ABSTRACT: The game theory lays out frameworks for studying decision-making in different environments. The principles of this theory predict human behaviour, leading with decision-making and describing how...
by Atteeq Uz Zaman, Muhammad Awais Khan, Muhammad Waqas, Talaal Bin Junaid, Wardah Siddiqui, Aqeel Ahmed, Muhammad Ramzan Abdul Karim
ABSTRACT: In the present work, a slurry of polyurethane (PU) was prepared by adding various contents (3 and 8 wt.%) of hexagonal boron nitride (h-BN). Ethanol was utilized as a solvent to reduce the...
by Navanit Sri Shanmugam, Vidya Subhash Chavan, David Boyajian, Shen-En Chen, Nicole L. Braxtan, R. Janardhanam
ABSTRACT: Three-dimensional (3D) printed railroad tracks can properly address the rendering of a variety of topographic profiles of naturally occurring landscapes and reduce construction costs. Load tests...
by Sheheryar Ahmed Khan, Tanweer Hussain, Intizar Ali Tunio, Muhib Aleem
ABSTRACT: Hard turning (HT) is a machining method which is widely adopted nowadays to produce an improved surface finish without the application of a grinding process. The available literature conveys to...
by Zia Ud Din, Mohsin Ali Marwat, Amna Ijaz, Muhammad Ramzan Abdul Karim
ABSTRACT: Polyvinylidene fluoride (PVDF) is a vital component in the manufacturing of flexible dielectric capacitors due to its exceptional electrical insulation properties. However, its thermal stability...
by Abbas Raza, Syed Waqar Ahmed, Adeel Hassan, Khurram Altaf, Hongyu Wei, Ghulam Hussain
ABSTRACT: The current article presents a case study of the defects that can occur in the metal fused deposition modeling (FDM) process, a popular additive manufacturing technique for producing metal parts....