Influence of Starch Powder on Compressive Strength and Microstructural Properties of Geopolymer Composite Materials Based on Metakaolin

Abstract

The main objective of the present study is the investigation of the behaviour of starch powder incorporated at different levels (0, 5, 10, 15, 20, 25, and 30 wt%) on the compressive strength and microstructural properties of metakaolin-based geopolymers. Sodium silicate with a molar ratio of SiO₂/Na₂O of 1.6 was used as the hardener and standard metakaolin was used as the aluminosilicate source. The results showed that when metakaolin was replaced by starch from 0 to 15 wt%, the compressive strength increased from 36.50 to 64.12 MPa. When metakaolin was replaced by starch above 15 wt%, the compressive strength decreased from 64.12 to 29.43 MPa. That of the reference geopolymer material is 36.50 MPa.The infrared spectra of the geopolymer composites indicate that the Si-O-C bonds are formed. The thermal behaviour of geopolymer composites containing starch shows a mass loss at around 100 and 278 °C. The geopolymer material without starch only shows a loss of mass at around 100 °C. The micrographs of the geopolymer composite with 15% by weight of starch show that the matrix is more compact, more homogeneous, and denser than the one without starch. On the contrary, possibly due to a large amount of unreacted starch in its network, the micrographs of the geopolymer composite obtained after the incorporation of 30 wt% starch show a heterogeneous microstructure. It can be concluded that suitable starch content for the synthesis of geopolymer composites would be around 15% by weight.